I’ve been hearing about this Integra for a few months now but it’s just been hectic around here that I’ve never got the chance to shoot it until last night. At first I was expecting something that I’ve seen around the city before. Once I got talking to Alex (the owner) – he had told me that the car has barely been out and he just happened to rack up just a little over 1000km’s on the car. That’s when I started to get excited to see it.

When he drove up, I realized why guys like Jackie and Pat vouched for the car. (Not that I doubted the car). There aren’t too many nicely done turbo’d cars around town but when there is, it’s a damn nice sight to see. Tuned with Hondata S300 w/ boost solenoid, he can put down 368 at 12 lbs of boost.

Get ready for a long list of parts for Alex’s Integra
Body:
Fully resprayed PPG NH583M (vogue silver metallic)
All original body panels (except right fender from previous owner)
Shaved body side mouldings
Shaved antenna
Shaved rear washer nozzle
Shaved front bumper
Shaved trunk lid
OEM Acura Integra Type-R front lip
OEM Acura Integra Type-R accessory side skirt
OEM Acura Integra Type-R accessory rear valances
T1R led bulbs for rear license plate
OEM Acura Integra headlights w/ap1 s2k retrofit
Spoon Sports blue wide mirror glass

Interior:
OEM Acura Integra Type-R carpet (reason for Type-R its actually black)
NEW OEM Integra floor mats
USDM OEM Integra Type-R carbon faux interior components (driver’s vent, hvac, ash tray, cigarette lighter, shifter bezel)
OEM Integra Type-R shift boot
OEM Integra Type-R armrest
OEM Integra Type-R rear bench (inserts rewrapped in bridge gradation fabric)
Privacy cover wrapped in bride black gradation fabric)
Door panel inserts wrapped in bride black gradation fabric)
Bride zeta 3 sport
Bride low max rails
Takata long harnesses
T1R T182R Titanium shift knob/ Mugen Machined Aluminum shift knob (switch in between)
Spoon Sports gen 2 steering wheel, held on by ballerbolts.com titanium bolts
Snap-On quick release hub
Autometer nexus boost gauge
Autometer nexus exhaust gas temperature gauge
Autometer nexus oil pressure gauge
Mugen gauge cluster
Spoon Sports blue wide rear view mirror (broken upon installation lol, waiting on A&J Racing for new one to arrive)
JDM OEM Honda Integra Type-Rx pedal set

Suspension:
Energy suspension polyurethane bushing kit
Tein flex coilovers
OEM Integra Type-R front sway bar
OEM Integra Type-R rear sway bar
ASR rear subframe reinforcement plate
Skunk2 rear lower control arms
Mugen front strut tower bar
Mugen rear strut tower bar
K-Tuned front traction bar (with rad mount)
J’s Racing c-pillar bar

Brakes/Wheels:
16×7 +42 offset 4×100 bronze Volk Racing TE37 (Aldrich & Alan C’s old wheels)
205/45R16 Bridgestone Potenza RE-01R
Spoon Sports brake lines
Spoon Sports twin block front callipers
Powerslot 96’ Honda Prelude SRV front rotors redrilled to 4×100
OEM Acura NSX front brake pads
Acura Integra GS-R rear callipers
Powerslot Acura Integra GS-R rear rotors
OEM Acura Integra GS-R rear brake pads

Engine/Engine Bay:
Shaved/Cleaned up and resprayed in PPG NH583M (vogue silver metallic)
Harness redone in new loom (got rid of the plugs we no longer needed. eg. abs, cruise, a/c, and so on)
ABS removed
Power Steering removed
Cruise control removed
Air Conditioning removed (not by choice, but force because of the exhaust manifold)
Wire tucked (neatly put away, but not overkill because we wanted it to accessible)
Tein hood struts
Ballerbolts.com titanium nuts for upper control arms, coilovers, and strut tower bar
30 sets of Mugen license plate bolts, every 10mm in the engine bay has a Mugen bolt in it
All coolant hoses replaces with new OEM ones.
Fluidyne aluminum half radiator
Spoon Sports black rad stay
Spoon Sports radiator cap
Spoon Sports radiator hose set
Mugen oil cap
JDM OEM Honda Civic Type-R red valve cover
JDM OEM Honda Civic Type-R N1 crank pulley
Spoon Sports spark plug wire cover
Spoon Sports spark plug wire set
Carbing oil catch can
Skunk2 battery tie down
Hasport engine mounts
Moroso oil pan
Dart B18 Block
JE 9.1.1 Piston/Ring Set
CP Rods
ACL Bearing
OEM Integra Type-R micropolished and balanced crankshaft
Brand new OEM Acura Integra Type-R cylinder head
Precise Engine Rebuilders Inc. Port and Polish
Ferrea 1mm oversize intake/exhaust valves
Comp Cams Titanium Valve Springs/Retainers
OEM Acura Integra Type-R Exhaust Camshaft
OEM Honda Civic Type-R Intake Camshaft
Greddy Timing Belt
Skunk2 Intake Manifold Port Matched to cylinder head
Skunk2 70mm throttle body port matched to Intake Manifold
Peakboost FTW turbo kit
Garrett T3/T04E .63ar
Tial 44mm Wastegate (10lbs. large spring)
Tial 38mm BOV (6lbs spring)
RC 550cc Injectors
AEM Fuel Rail
AEM Fuel Pressure Regulator
AEM Fuel Filter
B&M Fuel Pressure Gauge
3” Peakboost downpipe
T1R 70mm dolphin tip exhaust

Transmission/Drivetrain:
OEM Acura Integra Type-R LSD Transmission
OEM Acura Integra Type-R Flywheel
OEM Acura Integra Type-R shift linkages
Skunk2 Short Throw Shifter
ACT 4puck unsprung clutch
Driveshaft Shop Stage1 Axles

I/C/E:

Compustar Two-Way Alarm/Starter
Alpine CDA-105 Head Unit
Hertz EP 1 D Amplifier
Hertz 6.1/2” speakers/front components all around
OEM Acura RSX Type-S Bose Subwoofer

And once again.. 403 represent! Thanks again to Alex for coming out and giving us the chance to shoot his whip!